Do You Need Quarter Round With Laminate Flooring: 66 Shocking Facts

Today’s topic is Do You Need Quarter Round With Laminate Flooring. Obviously, you can find a great deal of How To Install Laminate Flooring Without Removing Baseboards-related content online. The proliferation of online platforms has streamlined our access to information.

There is a connection between the What Can I Use Instead Of Quarter Round? and Shoe Molding Vs Quarter Round information. additional searching needs to be done for How to Install Quarter Round Molding Without Nails, which will also be related to Do You Have To Remove Door Trim To Install Laminate Flooring.

66 Shocking Facts About Do You Need Quarter Round With Laminate Flooring | Quarter Rounds or Remove the Baseboards when replacing floors??

• Easiklip offers 3/4-inch quarter round molding made from solid oak. It comes in five colors, complimenting their solid oak flooring. These moldings come in 96-inch lengths and will match almost any existing wood or laminate flooring. - Source: Internet
• Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future. It is not the right choice because it won’t create a strong enough bond like glue will. Use caulk only for what it was designed for: to fill gaps if necessary. - Source: Internet
• Sometimes, the quarter round ends without making a turn. Use a return or end cap. It’s a small piece of molding that superbly finishes the end. Adding a return piece is not mandatory, but it makes a professional-looking finishing touch that hides the molding’s exposed end grain. - Source: Internet
• The installation process is relatively a very easy DIY task and is pocket-friendly. A quarter molding is sometimes confused with shoe molding because they look the same but are not the same thing. A quarter-round Molding - Source: Internet
• Another type of molding is shoe molding. It’s typically flatter and taller than a quarter round. The main differences between the two are: - Source: Internet
• Sometimes the corners are not exactly 90 degrees. In this case I will use an example of the outside corner being a 92 degree angle. When cutting the quarter round you will have to cut each side at 46 degrees so it will fit tight together. I will mention here that if you are installing 1/4 round the small gaps can be filled with some caulking. If you are installing a wood grain 1/4 round use and matching putty to fill the gaps. - Source: Internet
• Either way, there will be a slight expansion gap. Installing quarter round molding or shoe molding makes a gracefully smooth flooring transition from the vertical baseboard to the horizontal floor covering any gaps. They add a rounded shape and dimension to the transition. - Source: Internet
• Place the trim piece on the miter box or saw base, so the blade just touches the pencil mark. Make your first cut, then reverse the saw to cut 45-degrees for the other end of the trim. For a miter box, turn the molding around to cut an opposite 45-degree angle. - Source: Internet
• To hand-nail molding, drive each nail almost flush with the quarter round, then use the nail set to sink the head beneath the surface. Use putty to cover the nail holes. Be sure to use a paintable putty if you plan to paint later. - Source: Internet
• Pro Tip #1 - Make sure the blade rests on the outside edge of the pencil mark to prevent short cuts. You want to see the mark after you cut. Pro-Tip #2 - Always cut the end of a piece of quarter-round yourself before placing it. Don’t rely on the lumberyard to make a straight cut. - Source: Internet
• Both types of trim moldings start as long round dowels that are then rip-cut and milled into their respective shapes. They are stocked in very long lengths and racked vertically at the home improvement store or lumber center. This extra-long length is so that you can use full-length pieces to cover most walls. Although you can join shorter pieces to cover a long wall using scarf joints, most carpenters try to avoid this since full-length pieces give the wall a smoother look. - Source: Internet
• The last step is to fill the nail holes (and any other imperfections) in your quarter round. Because we stain ours, we use Patchal Putty that is pre-colored to match our stain, which makes this step super fast and easy. I just use my finger to apply it. - Source: Internet
• I used to think that quarter round and shoe molding are the same thing. But they aren’t! Shoe molding is 1/8″ round. In other words, it is 1/8 of a piece of a round dowel. Quarter round is 1/4″ round, so is slightly larger than shoe molding. - Source: Internet
• Luckily, this doesn’t have to be a daunting task. With the right tools and technique, removing quarter round can be a breeze (P.S. if you want to remove your baseboards too, this technique also works for floor trim). - Source: Internet
• Once your fit is perfect, use your brad nailer to nail them into place. Hold your quarter round trim tight to the floor and holder your nailer angled slightly downward as you fire it. Place your nails about 18 inches and be sure to always include nails close to each end. - Source: Internet
• To cut a quarter round, you can also do it in two ways. Freehand or using a tool called the miter box. If possible, don’t use freehand because it is difficult to attain a 45degree angle that will match the corners. - Source: Internet
• One of the most common questions people ask is if they really need the base shoe, or if it’s just an add on. The answer is a simple yes. Without it, there is typically a gap between the trim and flooring, which is not only unattractive but makes it extremely easy for dirt and debris to build up under the base trim. - Source: Internet
• If you do not want to rent or own a miter saw, you can buy a useful tool called quarter round scissors. It safely and cleanly cuts the quarter round and costs from $15 to $50, about the same price as a miter box and handsaw set. Plus, you can store them inside a toolbox if space is an issue. - Source: Internet
• Before you begin measuring and cutting, you must check the correct angle of every corner. Most wall corners are not a perfect 90-degree angle. They can be off by a degree or more, causing an unsightly gap where the quarter round ends meet. - Source: Internet
• As you can see in these two photos the difference it makes after you chalk in the quarter round. The top photo is the BEFORE and the bottom is the AFTER photo. (click on photos to enlarge) - Source: Internet
• There are two ways to install a new hardwood flooring. You can remove the existing baseboard, install the flooring, and replace the baseboard. The other method for some older homes is to install the flooring over the existing baseboard without removing it. - Source: Internet
• We simply choose to finish our exposed ends in a pretty way. This is a method Joe came up with years ago. We have no idea what to call it, though around here I refer to it as “the Joe special.” As in “this piece needs to be 4 inches long with the Joe special at the end.” I’m not kidding. - Source: Internet
• In some cases if the base board is installed on a new laminate or hardwood floor that isn’t flat, there will be gaps under the base board that take away from the overall look of the finished floors. The base board could be described as following the contour of the floor, but there are times when this is not the case. This base board was installed by another installer that must have worked at a lower rate. So installing quarterly round molding can be used to cover this unsightly gap. In this case I don’t think they installed 1/4 round to cover this gap. - Source: Internet
• The purpose of installing the quarter round is to cover the expansion gap around the walls. You can also cover the gap with base board. Most likely you will be installing the quarterly round up against the existing base board. - Source: Internet
• Absolutely not, if there is enough space to slide in the laminate. Read this how-to if this is your situation. If there is not enough space you can either take off the baseboard or commit to installing quarter-round moulding in front of the current baseboard. - Source: Internet
• It’s up to you if you want to paint quarter-round before installing the trim—there’s no right or wrong way. Most carpenters like to finish the long trim pieces before measuring, cutting, and installing them—either by painting or applying stain and varnish. This is considerably easier than trying to finish the quarter-round or shoe molding after it is nailed in place. Some touch-up work will be needed after the trim is installed, but this can be done with a brush. The only downside of pre-finishing is that you may have nail holes you’ll need to fill in. - Source: Internet
• Before you even think about installation, you are going to want to finish your quarter round molding by painting or staining it. We have lived with both painted and stained quarter round. I 100% recommend staining the quarter round to match your floors. Why? Painted molding winds up getting chipped and dirty over time, no matter how clean and careful you are. Stained molding looks brand new year after year! - Source: Internet
• You want to measure and mark one piece at a time. Mark the length on your quarter round molding and use your miter saw to make a straight cut. You will install the first piece so that the straight end cut butts right up into the corner. That’s right… we are NOT mitering. We are coping, so the straight edge goes right into the corner. - Source: Internet
• Carpenters like to use these bottom trim pieces because they reduce the need for complicated baseboard scribe cuts. Professionals like to attach shoe molding with a nail gun rather than with glue. Nailing ensures a snug, consistent fit and allows you to access the area underneath the trim if necessary. If you’re new to trim installation, the best tool for nailing shoe molding or quarter-round is an electric brad nailer. This tool will automatically set or recess the small finish nails you need for quarter-round trim, and can greatly speed up your work. - Source: Internet
• When caulking the 1/4 round, run a small bead along the top of the 1/4 round as well as filling in the nail holes. Run your finger along the top to push the caulk into the space. Use the wet rag (not dripping law) to wipe down the 1/4 round. This can take some time to make it a huge difference. - Source: Internet
• Measure and mark your next piece that will meet up with your first piece in the corner. Again, you measure the entire length of the wall. Mark the length on your quarter round molding and use your miter saw to make a straight cut. - Source: Internet
• Installing quarterly round moldings is a task that can be used to install laminate or hardwood flooring. It can be confusing trying to cut all the angles you may encounter. I will try to explain it in simple terms so you can install your own quarter round. - Source: Internet
• The easiest way to cut the quarter round is with a miter chop saw. Most people have one of these or know where to borrow one. They can be purchased for around $ 100.00. The chop saws usually have the angles preset on the saw so there is no guessing at the proper angle. - Source: Internet
• Continue measuring, cutting, and nailing trim pieces around the room, one piece at a time. You will cope all of your inside corners. Use a miter joint for any outside corners. - Source: Internet
• determine the perimeter of your room: add the length and width measurements together and multiply by two. Measure the width of each archway and doorway, and add together. subtract the total of the doorway widths from the room perimeter to determine the total required length of wall trim and quarter round molding. - Source: Internet
• Basically when installing quarterly round moldings you will encounter two different types of angles. The inside corner and the outside corner. Both of these corners are 90 degree, which means in order for the 1/4 round to fit together with a tight fit you will cut each side at 45 degrees. - Source: Internet
• Quarter-round only needs to be used when installing laminate flooring if the baseboards are not removed before installation. The quarter-round will hide the gap between the flooring and the baseboard while still letting the flooring float. Otherwise, quarter-round is not necessary. - Source: Internet
• Click-together vinyl flooring is pretty tough stuff. One of the biggest installation benefits, however, is its slight flexibility–flexibility which we’ll be using to our advantage. It isn’t truly necessary to bring each subsequent row into each preceding row at the dramatic angle which the instructions indicate to be necessary. - Source: Internet
• Click-together flooring is made for spaces without baseboards. This is because–according to the instructions–you have to tilt each subsequent row into the row preceding it, which requires vertical space. Vertical space which already-installed baseboards would deny. So if you find yourself in the relatively rare position of wanting to paint everything–the walls, trim, and baseboards–at once, you might want to install the floor first and use dropcloth technology. - Source: Internet
• These include a miter saw to cut the shoe molding, a coping saw to create inside corners, and a finish nailer (or pinner) to attach the molding. Because shoe molding is small and easy to damage, this is one case where a finish nailer or pinner is preferable to a hammer and nails. Start in a corner and work your way around the room in one direction. This makes it simpler to cut the coping joints you’ll need for the inside corners. - Source: Internet
• We’ve installed quarter round molding ourselves every time we’ve finished installing our favorite laminate floors in our master bedroom and hallway, and throughout the downstairs of our house. (I talk about why we chose laminate flooring in those posts, but you can also read this post about the pros and cons of different types of flooring). And while new flooring makes a HUGE impact in any home, I’m telling you it doesn’t look amazing until we install the quarter round. It’s a small thing that makes a BIG difference. - Source: Internet
• Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name. - Source: Internet
• We are looking at getting LVP (or Linoleum can’t decide which) in our finished basement. We had two contractors out (we are getting a couple more quotes). The first guy was pretty low priced, and said they would remove our baseboards and then “shift them back down” if needed (as in, there’s a gap). I did ask him about the quarter round and he said it’s likely “not necessary” and that he can just shift the baseboard down if the gap is too big. Then we’d just have to paint the area where it’s shifted. - Source: Internet
• An expansion gap is essential when it comes to laminate flooring installation. The recommended expansion gap is a minimum of ¼ inch. Expert installers say that the larger the space, the larger the expansion gap should be, as the floor needs more space to expand and contract with temperature. Since laminate flooring is a floating floor, it is not attached to the sub-floor and sits on top of the underlayment. - Source: Internet
• Another way to think of quarter-round molding is to imagine a round dowel. From the end, the dowel is cut into four pie pieces. Each resulting piece would be a quarter-round. - Source: Internet
• The easiest method for installing quarterly round molding is to use a nail gun which requires a compressor. If you are installing a lot of quarterly, buying a nail gun and compressor is not too expensive. You can get a combo set from 150.00 to 300.00 dollars. - Source: Internet
• But personally, I think quarter-round looks best painted to match the rest of the baseboard. Painting this little piece of trim is very easy. Pre-primed base shoe is the fastest to paint, but stained shoe is easy to paint too with a little prep work. - Source: Internet
• Quarter-round molding, as the name implies, is one-quarter of a long section of a round wood doweling or rod. The cross-section is a 90-degree arc. Sometimes the baseboard is too thin to cover the expansion gap between the floor and the wall, which can be as wide as 5/8-inches (15mm). Other times, the baseboard may leave gaps. Installing quarter round trim on baseboards covers gaps for a smooth, rounded finish to the baseboard and floor. - Source: Internet
• The second contractor I talked to was pricier, but included the quarter round installation as apart of the package. When I asked about that he almost thought I was joking. He said it’s 100% necessary and anything else would look awful. And anyone recommending any different is probably not a professional. Is that true? Having trouble figuring this out. - Source: Internet
• Despite having the same job, quarter round and shoe molding are not the same thing. Quarter round is a quarter of a round dowel while shoe molding is a bit taller and more curved. Which is right for you is really a matter of personal style. - Source: Internet
• Buckling: What happens when a floor can’t expand properly.For a laminate flooring installation and correct size of the expansion gap, we suggest to use installation spacers that can be found in an installation kit, between planks and the wall to allow for the required 1/4 inch expansion space. Be sure to look at the installation instructions included in your flooring box as it can give you important information about installing your floor. Remember that some floors require a bigger gap than others. - Source: Internet
• If you are looking for a premium Quarter Round Easiklip offers 3/4-inch quarter round molding made from solid oak. It comes in five colors, complimenting their solid oak flooring. These moldings come in 96-inch lengths and will match almost any existing wood or laminate flooring. - Source: Internet
• One of the more “creative” parts of the renovation–one of many projects to finish out a dark, damp, unfinished basement–was how to install that last line of click lock laminate flooring under the previously installed and painted baseboard. The directions of click-lock flooring of any type are easy enough to follow. Except what happens on the last row…if the baseboard is already installed? - Source: Internet
• It is easier to install baseboards after flooring. However, it is easier to paint (baseboards included) with no consequences of ruining newly installed flooring. It is possible to install the baseboard with a gap to accommodate the height of laminate or hardwood flooring. - Source: Internet
• Installing quarter-round molding is an inexpensive upgrade that makes any baseboard look better. Molding adds visual character and detail to transitions that are generally dull and unobtrusive. Like a bow tie on a tux, it provides a stylish, finished look to any room. - Source: Internet
• Quarter round is found at the base of baseboards over hardwood or tile floors to help ease the transition between the floors and trim and cover any gaps. Now those gaps aren’t just caused by unlevel floors or poor installation. Many floors need room to allow for expansion and contraction throughout the year. - Source: Internet
• I use the screw driver with the law to clean the corners after I apply the caulk. You can’t clean it all out with your finger. The adhesive caulk is also a glue which helps to attach small sections of 1/4 round that are too small for nailing and also for gluing in returns. (I will talk about returns as well) - Source: Internet
• It’s simply one-quarter of a round piece of wood, with the width and height most often 3/4 of an inch. This molding comes in lengths up to to 7 feet, so you can cut pieces to fit your project. Traditionally quarter round came in wood, either finger-jointed if you were going to paint it or solid wood for staining. - Source: Internet
• Invest in a trim puller. Yes, you can use a pry bar and putty knife, but the trim puller will make things easier and minimize damage to both the trim and the wall. In fact, the only damage we had when removing our quarter round and trim were areas that we accidentally scored with the utility knife. - Source: Internet
• Step 2 - Apply a thin bead of liquid floor adhesive to the sanded side of the quarter-round molding. Line up the molding against the baseboard and press it against the wood. You can use another board to apply even pressure if you don’t have an extra set of hands. Press the quarter round in place for at least a minute to create a tight bond. - Source: Internet
• Now that you’ve learned how to remove quarter round and trim, it’s time to get started on your next project. For us, it’s removing the tile and re-tiling the laundry room floor. Once we get that all installed, we’ll be installing new quarter round to finish off the look. - Source: Internet
• I took the opportunity when I was working in a home to take a picture of the 1/4 round a previous installer. He didn’t cut the angle properly as seen in this photo. And didn’t bother to even use some putty to hide it. - Source: Internet
• If you’ve been looking at baseboard finishing trim, you’ve probably discovered quarter-round, too. As the name implies, this type of molding is one-quarter of a round dowel (split a dowel down the middle, then further split the halves, and you’ll have quarter-round). While quarter-round can be installed along the bottom of baseboard, trim carpenters and homeowners tend to prefer the sleeker look of shoe molding, which is taller and narrower than its curved counterpart. - Source: Internet
• So yes, quarter round does have an actual purpose. Despite it’s purpose, you might want to remove it at some point. Whether you’re replacing your quarter round or removing it to update your floors, here’s the easy way to pry it away with damage. - Source: Internet
• Successfully forcing the flooring together in this way is more a matter of technique than power, so don’t be getting out the mini-sledge if your first hit doesn’t result in a perfect joint. Just keep hitting the tool until either the adhesive on the carpet tape allows the tool to start sliding–at which point you can add more carpet tape to the floor side–or until each section of floor joint is perfect. Then you move the tool a few inches, add new tape, and repeat the process. - Source: Internet
• The final piece of any flooring projects are the moldings or trim around your room. Vinyl moldings and trim add that essential finishing piece to complete your project. They also serve a purpose to protect the expansion gap between your floors and the wall, while keeping moisture out. - Source: Internet

Following are some suggestions for where to begin your search for data on do you have to install quarter round with laminate flooring: You should try to find How To Install Laminate Flooring Without Removing Baseboards-related information from reputable places. Libraries, online resources, and even paid journalists all fall under this category. - It's crucial to be aware of the various electronic media sources available when researching What Can I Use Instead Of Quarter Round?, such as Google and YouTube. You may also get info about How To Install Laminate Flooring Without Quarter Round on social media sites like Facebook and Twitter.

It’s crucial to read to examine the authenticity of each source in order to acquire the greatest information regarding How To Install Laminate Flooring Without Quarter Round.

Video | Do You Need Quarter Round With Laminate Flooring

You’ll learn more about do you have to use quarter round with laminate flooring after watching the films included in this post, which come from a variety of different sources. Information on a wide range of topics can be easily accessed via the internet.

## Notable features of What Size Quarter Round For Laminate Flooring include:

• Do You Need Quarter Round With Laminate Flooring
• Do You Have To Use Quarter Round With Laminate Flooring
• Do You Have To Install Quarter Round With Laminate Flooring
• Do You Have To Remove Quarter Round With Laminate Flooring
• Do I Need Quarter Round For Laminate Flooring

With the abundance of What Can I Use Instead Of Quarter Round?-related resources available online, it’s easy to find what you’re looking for.

This is not how most people would expect to learn more about What Size Expansion Gap for Installing Laminate Flooring?, so be prepared for some shock value. It paves the way for a closer examination of the Do I Need Quarter Round For Laminate Flooring information’s actual substance and its potential applications. techniques for making How to Install Quarter-Round Molding data visualizations that are both aesthetically pleasing and practically applicable. They can spread the word about 1.5 Quarter Round in professional and promotional settings. For this reason, we also include Do I Need Quarter Round For Laminate Flooring-related pictures.

At last, this article sums up key points about How To Install Laminate Flooring Without Quarter Round. There is also a comparison of your How to Remove Quarter Round with Ease knowledge to that of Do You Need Quarter Round With Baseboards, as well as a discussion on How To Install Laminate Flooring Without Removing Baseboards and How to Install Quarter-Round or Shoe Molding Trim.